|
| High-Tech
MFIA Inc. designs high-tech information technology systems
including emergency and standby generators, uninterruptible
power supplies (UPS), power distribution units (PDU), data
center hvac, racks, structured cabling, underfloor
distribution, cable trays, etc. |
| |
  |
Verio Premier Data Center
Tukwila, Washington
Electrical design services for 60,000 square foot
tenant improvement of a top-of-the-line internet data
center, including five paralleled 1,500 kW emergency
generators, two electrical services, nine 500 kVA
parallel-redundant UPS systems with associated PDA's,
underfloor distribution to racks/cabinets/suites, and
lighting systems. |
|
| |
Freightliner Data Center
Emergency Systems
Portland, Oregon
Electrical design services for upgrades to the existing
power and emergency power systems primarily supplying a world
headquarters data center, including a 1,500 kW emergency
generator, new electrical service, and two 500 kVA UPS systems
with associated PDA's. Created a Tier 4 Electrical System
Topology. |
 |
| |
Mercy Medical Hospital Data
Center
Roseburg, Oregon
Electrical and mechanical design services for a new data
center, including UPS, PDU's, and backup generator systems. |
| |
Matsushita Electronic Materials
Forest Grove, Oregon
Phase 2 Expansion: Provided electrical and mechanical
design services for a 24,000 square foot plant expansion and
fit-up for printed circuit board material manufacturing plant.
Mechanical systems included cooling water, thermal fluid, CDA,
HVAC, and plumbing. Electrical systems included power, process
instrumentation and control raceways & cables, lighting,
and fire alarm. |
| |
Epson Portland Inc.
Hillsboro, Oregon
Phase I Ink Cartridge Remodel: Provided mechanical design
services for a 7,100 square foot remodel including design of
5,600 square foot Class 10,000 clean room with gowning room
and material storage. Modifications of compressed air and
process vacuum systems.
Phase 2 Ink Cartridge Addition: Provided mechanical and
electrical design services for a 60,000 square foot addition
including 23,200 square feet and 8,000 square feet Class
10,000 clean rooms with supporting equipment spaces, material
storage, mechanical spaces and unclassified manufacturing
space. Mechanical systems included 4 process vacuum systems,
CDA, pure water, process waste, mold machine cooling water,
plant air, ink piping systems, process exhaust, air handling
systems, and chiller. Electrical systems included additional
electrical service, gutter distribution system for
manufacturing equipment, mold machine connections, lighting,
and fire alarm. |
| |
Mitsubishi Silicon America
Arsenic Growing Room Expansion
Salem, Oregon
Provided mechanical design for a Class 10,000 clean room
including arsenic duct collection system, process vacuum
piping system, housekeeping vacuum system, cooling water and
compressed air piping systems, nitrogen and argon piping
systems, gas-fired make-up air system, and HEPA ceiling
system. |
| |
Japan Aviation Electronics
Tualatin, Oregon
Provided mechanical design for 29,000 square foot
manufacturing and shipping addition and remodel of the
electronics assembly/machine room. |
| |
Toshiba Ceramics America
Expansion
Hillsboro, Oregon
Provided mechanical design services for interior
improvements of existing building shell to create 5,000 square
foot Class 10,000 clean room for quartz glass crucible
manufacturing, and an upgrade of the plant cooling water
system. |
| |
Sharp Microelectronics
Technology
Camas, Washington
LCD TFT Assembly: Provided mechanical design services
for a 11,700 square foot, Class 10,000 clean room for liquid
crystal display (LCD) assembly. Systems included air handlers
with hydronic heating and cooling coils, duct mounted
humidifiers and HEPA ceiling filters.
Engineering Lab: Provided mechanical design services
for a 4,000 square foot, Class 100 clean room including low
temperature chilled water system, heating water system, CDA
system, process cooling water system, and process vacuum
system. Air handling systems included make-up air with
humidification and dehumidification and recirculating air
handlers with direct drive plug fans and HEPA ceiling modules.
Process Technology Lab: Provided mechanical design
services for a 2,000 square foot Class 100 clean room and
remodel of existing unimproved office space. Included new
scrubbed exhaust and process vacuum systems and expansion of
house vacuum system. Air was supplied by recirculating air
handlers with chilled water coils and HEPA ceiling modules.
Sharp Laboratories of America Building: Provided mechanical
design services for a 55,000 square foot office building. |
| |
|
|
|
